Using Facsimile Program Dialing For Transmission; Facsimile Program Dialing - Minolta Di250f Operator's Manual

4. Using Facsimile Program Dialing for Transmission

Facsimile Program Dialing

If the various functions that can be used for communications (such as Image Quality settings and 2-to-1
Transmission) are registered as a facsimile program key in advance, just touching these keys will start
transmission without having to select the communications functions each time. It is easy to set up a
multiple transmission by registering multiple recipients in a single facsimile program key, and to set up a
transmission to be sent at the same time every day by registering the transmission time.
Useful Tip
Destination numbers and communications function must be registered as Facsimile Program keys in
advance. Up to 30 numbers can be registered as program keys. However, the total registered number of
Facsimile Program keys and One-touch keys cannot exceed 300.
"Registering Communication Conditions in Facsimile Program Keys"
Using a Facsimile Program for
Transmission
Load the document in the unit.
1
"Handling Documents"
Press the Fax key.
2
Utility Mode Check
Start
Touch the Facsimile Program key to be used.
3
Useful Tips
• Facsimile Program keys are those with
borders.
• The first index screen is automatically
displayed.
Touch the index tabs,
to find the desired Facsimile program key.
p.1-20
Pause Fax Copy
Access
Interrupt
Stop
Panel Reset
1166O346AB
1171P004EA
← →
or Index List
p. 11-12
Press the Start key.
4
Transmission starts.
NOTE
If a time specification has been registered, the
document is stored in the memory and
transmission starts at the specified time.
3-9