When This Type Of Copy Is Produced - Minolta Di200f Operator's Manual

11. When This Type of Copy is Produced

When this type of copy is produced
Symptom
The image is too light.
1074O108
The image is too dark.
1074O109
Possible Cause
The exposure level for the Auto
Exposure mode is set at "Lighter."
The exposure level for the Manual
Exposure mode is set at "Lighter."
You have been making copies from
a photo or an original with a large
dark area.
The Toner Bottle has just been
replaced.
The Touch Panel shows the
message "Please add toner."
The paper is damp.
The exposure level for the Auto
Exposure mode is set at "Darker."
The exposure level for the Manual
Exposure mode is set at "Darker."
The Original Glass surface is dirty.
The original is not held tightly
against the Original Glass.
Action
Change the setting of "Default
Copy Output Levels" of User's
Choice.☞p.8-4
Or, cancel the Auto Exposure mode
and select Manual Exposure to
adjust the exposure level to obtain a
darker image. ☞p.3-42
Touch [Darker] as necessary to
obtain a darker image. ☞p.3-42
The machine needs more toner.
Replenish toner by using Toner
Replenisher of Utility Mode.
☞p.7-19
The machine needs more toner.
Replenish toner by using Toner
Replenisher of Utility Mode.
☞p.7-19
Change the Toner Bottle with a new
one. ☞p.10-10
Change the paper. ☞p.10-2
Change the setting of "Default
Copy Output Levels" of User's
Choice. ☞p.8-4
Or, cancel the Auto Exposure mode
and select Manual Exposure to
adjust the exposure level to obtain a
lighter image. ☞p.3-42
Touch [Lighter] as necessary to
obtain a lighter image. ☞p.3-42
Wipe the Original Glass clean with
a soft dry cloth. ☞p.11-10
Place the original in position so that
it is held tightly against the Original
Glass. ☞p.2-30
10-43