Installing The Integrated Administrator Module Onto The Interconnect Tray - HP ProLiant BL e-Class System Maintenance And Service Manual

Removal and Replacement Procedures
4. Position the Integrated Administrator module so that its holes are aligned with the anchor
pins of the replacement interconnect tray (1).
5. Replace the two screw locks with the tool provided in the spares kit (2).
6. Rotate the anchor pins 90 degrees to lock the Integrated Administrator module into
position (3).
Figure 2-26: Installing the Integrated Administrator module onto the
interconnect tray
7. Replace the interconnect tray. See the "Removing the Interconnect Tray" section in this
chapter.
2-30
HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM
HP ProLiant BL e-Class System Maintenance and Service Guide