Ata Hard Drive Assembly; Proliant Bl10E G2 Server Blade Ddr Sdram Dimm Specifications; Ata Hard Drive Assembly Specifications - HP ProLiant BL e-Class System Maintenance And Service Manual

Table 5-8: ProLiant BL10e G2 Server Blade DDR SDRAM DIMM Specifications
Feature
Size
Speed
Width
Upgrade requirement
Note: Use only 128-MB, 256-MB, or 512-MB, 72-bit wide, 3.3 V, registered ECC DDR SDRAM.
SDRAM can be either 100 or 133 MHz. Use HP DDR SDRAM only.

ATA Hard Drive Assembly

Table 5-9: ATA Hard Drive Assembly Specifications
Feature
Capacity
Height
Size
Interface
Transfer rate
Rotational speed
Bytes per sector
Logical blocks
Operating
temperature
HP ProLiant BL e-Class System Maintenance and Service Guide
HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:10 PM
Description
128 MB, 256 MB, 512 MB
133 MHz (operating at 100 MHz)
72 bits
Any combination of like-paired DDR SDRAM DIMMs that provide
a minimum of 256 MB
30-GB Hard Drive
30,005 MB
9.5 mm (0.374 in)
70mm (2.76 in) width
9.5mm (.37 in) height
100mm (3.94 in)
diameter
ATA-5 (IDE) 100 MB/s
16.3 - 30.2 MB/sec
(Disk-Buffer)
4,200 RPM
512
58,605,120 (LBA)
10°C to 35°C (50°F to
95°F) (Ambient)
40-GB/4200 RPM
Hard Drive
40,007 MB
9.5 mm (0.374 in)
70mm (2.76 in) width
9.5mm (.37 in) height
100mm (3.94 in)
diameter
ATA-5 (IDE) 100 MB/s
18.7 to 34.7 MB/sec
(Disk-Buffer)
4,200 RPM
512
78,140,160 (LBA)
10°C to 35°C (50°F to
95°F) (Ambient)
Specifications
40-GB/5400 RPM
Hard Drive
40,007 MB
9.5 mm (0.374 in)
70mm (2.76 in) width
9.5mm (.37 in) height
100mm (3.94 in)
diameter
ATA-5 (IDE) 100
MB/s
27.8 to 44.1 MB/sec
(Disk-Buffer)
5,400 RPM
512
78,140,160 (LBA)
10°C to 35°C (50°F to
95°F) (Ambient))
5-9