Table of Contents
Advertisement
Removal and Replacement Procedures
Hot-Plug Fans
IMPORTANT: You can use the Integrated Administrator to identify a failed hot-plug fan. Refer to the
HP ProLiant BL e-Class Integrated Administrator User Guide for details.
To remove a hot-plug fan:
1. Press the release latch on the fan cage (1).
2. Pull the fan cage out of the enclosure until it locks in the open position (2).
Figure 2-2: Extending the fan cage
3. Identify the failed hot-plug fan by observing the fan status LED on each hot-plug fan. An
amber LED indicates a failed hot-plug fan.
2-6
HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM
HP ProLiant BL e-Class System Maintenance and Service Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the ProLiant BL e-Class System and is the answer not in the manual?