Non-Hot-Plug Procedures; Opening The Access Door - HP ProLiant BL e-Class System Maintenance And Service Manual

7. Place the enclosure on a level, nonconductive surface.
8. Release the latches on the access door (1).
9. Open the access door (2).
Figure 2-12: Opening the access door

Non-Hot-Plug Procedures

Before removing or replacing non-hot-plug components, you must power down the server
blade enclosure completely. Non-hot-plug components in the ProLiant BL e-Class system
include:
•
Fan cage
•
Fan backplane assembly
•
Interconnect tray
•
Integrated Administrator module
•
Enclosure status assembly
•
DIMM
HP ProLiant BL e-Class System Maintenance and Service Guide
HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM
WARNING: A risk of injury from high current-electrical energy exists. Be sure the
power to the enclosure is completely shut off before opening the access door.
Removal and Replacement Procedures
2-17