Related Manuals for HP ProLiant BL e-Class System
Summary of Contents for HP ProLiant BL e-Class System
- Page 1 HP ProLiant BL e-Class System Maintenance and Service Guide June 2003 (Fifth Edition) Part Number 249066-005 HP CONFIDENTIAL Codename: MacDuff Part Number: 249066-005 Last Saved On: 5/12/03 3:13 PM...
- Page 2 “as is” without warranty of any kind and is subject to change without notice. The warranties for HP products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty.
-
Page 3: Table Of Contents
Non-Hot-Plug Procedures ........................2-17 Fan Cage ............................2-18 Fan Backplane Assembly........................2-20 Integrated Administrator Module ..................... 2-21 Enclosure Status Assembly....................... 2-22 HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: MacDuff Part Number: 249066-005 Last Saved On: 5/12/03 3:13 PM... - Page 4 RJ-45 Patch Panel Interconnect Tray......................5-7 Server Blade Components..........................5-8 Operating and Performance Specifications ..................5-8 Memory (SDRAM DIMM) .........................5-8 ATA Hard Drive Assembly.........................5-9 Index HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: MacDuff Part Number: 249066-005 Last Saved On: 5/12/03 3:13 PM...
- Page 5 4-15 Hot-plug fan health LEDs......................... 4-17 4-16 Server blade LEDs ..........................4-18 4-17 Diagnostic adapter LEDs ........................4-19 HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: MacDuff Part Number: 249066-005 Last Saved On: 5/12/03 3:13 PM...
- Page 6 ProLiant BL10e Server Blade SDRAM DIMM Specifications ............5-8 ProLiant BL10e G2 Server Blade DDR SDRAM DIMM Specifications ...........5-9 ATA Hard Drive Assembly Specifications ..................5-9 HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: MacDuff Part Number: 249066-005 Last Saved On: 5/12/03 3:13 PM...
-
Page 7: About This Guide
Improper repairs can create conditions that are hazardous. Audience Assumptions This guide is for service technicians. HP assumes you are qualified in the servicing of computer equipment and trained in recognizing hazard in products with hazardous energy levels and are familiar with weight and stability precautions for rack installations. - Page 8 AC power cord into a properly grounded AC outlet only. NOTE: Any indications of component replacement or printed wiring board modifications may void any warranty. viii HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: MacDuff Part Number: 249066-005 Last Saved On: 5/12/03 3:13 PM...
-
Page 9: Where To Go For Additional Help
In the United States and Canada, call 1-800-652-6672. • Outside the United States and Canada, refer to www.hp.com HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: MacDuff Part Number: 249066-005 Last Saved On: 5/12/03 3:13 PM... -
Page 10: Illustrated Parts Catalog
Illustrated Parts Catalog This chapter provides the illustrated parts breakdown and spare parts list for the HP ProLiant BL e-Class system. See Table 1-1 for the names of referenced spare parts. HP ProLiant BL e-Class System Maintenance and Service Guide... -
Page 11: Proliant Bl E-Class Server Blade Enclosure Components (Exploded View)
Illustrated Parts Catalog ProLiant BL e-Class Server Blade Enclosure Components (Exploded View) Figure 1-1: Enclosure components HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-005 Last Saved On: 5/12/03 2:58 PM... -
Page 12: Proliant Bl10E Server Blade Components (Exploded View)
Illustrated Parts Catalog ProLiant BL10e Server Blade Components (Exploded View) Figure 1-2: Server blade components HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-005 Last Saved On: 5/12/03 2:58 PM... -
Page 13: Proliant Bl10E G2 Server Blade Components (Exploded View)
Illustrated Parts Catalog ProLiant BL10e G2 Server Blade Components (Exploded View) Figure 1-3: Server blade components HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-005 Last Saved On: 5/12/03 2:58 PM... -
Page 14: Spare Parts List
DIMM B: 256-MB registered 133-MHz SDRAM * 159377-001 DIMM C: 128-MB registered 133-MHz SDRAM * 159226-001 * Not shown continued HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-005 Last Saved On: 5/12/03 2:58 PM... - Page 15 RJ-21 patch panel interconnect tray 253078-001 RJ-45 patch panel interconnect tray 253076-001 Enclosure shipping bracket kit * 293119-B21 * Not shown HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-005 Last Saved On: 5/12/03 2:58 PM...
-
Page 16: Removal And Replacement Procedures
Always be properly grounded when touching a static-sensitive component or assembly. • Avoid touching pins, leads, or circuitry. • Use conductive field service tools. HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 17: Symbols On Equipment
Weight lb damage to the equipment, observe local occupational health and safety requirements and guidelines for manual material handling. HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 18: Rack Warnings And Cautions
HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 19: Hot-Plug Procedures
Hot-plug components in the ProLiant BL e-Class System include: • Hot-plug power supplies • Hot-plug fans NOTE: Port-color denotes hot-plug components. HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 20: Hot-Plug Power Supplies
Figure 2-1: Removing a hot-plug power supply Reverse steps 1 through 5 to replace the hot-plug power supply. HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 21: Hot-Plug Fans
3. Identify the failed hot-plug fan by observing the fan status LED on each hot-plug fan. An amber LED indicates a failed hot-plug fan. HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 22: Preparing For Non-Hot-Plug Procedures
2. If the server blade is active, notify users and stop applications as necessary. 3. Shut down the operating system. This may shut off server blade power. HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 23: Pressing The Power Button On A Server Blade
Figure 2-4: Pressing the power button on a server blade HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 24: Powering Down The Enclosure
“Power Off” option in the Integrated Administrator. To power down the enclosure using the Integrated Administrator, refer to the HP ProLiant BL e-Class Integrated Administrator User Guide for detailed instructions. HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 25: Pressing The Enclosure Power Button On The Rear Panel (Cables Removed For Clarity)
Two methods are available for performing an emergency shutdown on the enclosure and all server blades: • Using the Integrated Administrator • Pressing and holding the enclosure power button 2-10 HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 26: Disconnecting The Power Cords From The Rear Panel
Administrator cannot perform a graceful shutdown on the enclosure and all server blades, the Integrated Administrator performs an automatic emergency shutdown. To power down the enclosure using the Integrated Administrator, refer to the HP ProLiant BL e-Class Integrated Administrator User Guide for detailed instructions. -
Page 27: Removing A Server Blade
CAUTION: Integrated Administrator security settings are assigned to server blade bays, not to server blades. If server blades change locations within the enclosure, Integrated Administrator settings must also be adjusted to ensure accurate security. Refer to the HP ProLiant BL e-Class Integrated Administrator User Guide for more information on security settings. -
Page 28: Removing A Server Blade Blank
Figure 2-9: Removing a five-bay server blade blank Reverse steps 1 and 2 to replace the server blade blank. HP ProLiant BL e-Class System Maintenance and Service Guide 2-13 HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 29: Removing The Interconnect Tray
When closing the release latches on the interconnect tray, be sure that the locking latches click audibly into place. 2-14 HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 30: Removing The Server Blade Enclosure From The Rack
CAUTION: Integrated Administrator security settings are assigned to server blade bays, not to server blades. If server blades change locations within the enclosure, Integrated Administrator settings must also be adjusted to ensure accurate security. Refer to the HP ProLiant BL e-Class Integrated Administrator User Guide for more information on security settings. -
Page 31: Opening The Access Door
CAUTION: Integrated Administrator security settings are assigned to server blade bays, not to server blades. If server blades change locations within the enclosure, Integrated Administrator settings must also be adjusted to ensure accurate security. Refer to the HP ProLiant BL e-Class Integrated Administrator User Guide for more information on security settings. -
Page 32: Non-Hot-Plug Procedures
• Fan backplane assembly • Interconnect tray • Integrated Administrator module • Enclosure status assembly • DIMM HP ProLiant BL e-Class System Maintenance and Service Guide 2-17 HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 33: Fan Cage
CAUTION: Integrated Administrator security settings are assigned to server blade bays, not to server blades. If server blades change locations within the enclosure, Integrated Administrator settings must also be adjusted to ensure accurate security. Refer to the HP ProLiant BL e-Class Integrated Administrator User Guide for more information on security settings. -
Page 34: Disconnecting The Fan Cable From The Power Backplane
13. Disconnect the fan cable from the power backplane (3). Figure 2-13: Disconnecting the fan cable from the power backplane HP ProLiant BL e-Class System Maintenance and Service Guide 2-19 HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 35: Fan Backplane Assembly
CAUTION: Integrated Administrator security settings are assigned to server blade bays, not to server blades. If server blades change locations within the enclosure, Integrated Administrator settings must also be adjusted to ensure accurate security. Refer to the HP ProLiant BL e-Class Integrated Administrator User Guide for more information on security settings. -
Page 36: Integrated Administrator Module
3. Disconnect all cables and power cords from the AC power source. 4. Disconnect all cables and power cords from the enclosure rear panel. HP ProLiant BL e-Class System Maintenance and Service Guide 2-21 HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 37: Enclosure Status Assembly
5. Remove all server blades and server blade blanks. See the “Removing a Server Blade” and the “Removing a Server Blade Blank” sections in this chapter. 2-22 HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 38: Disconnecting The Enclosure Status Cable From The Server Blade Backplane
CAUTION: Integrated Administrator security settings are assigned to server blade bays, not to server blades. If server blades change locations within the enclosure, Integrated Administrator settings must also be adjusted to ensure accurate security. Refer to the HP ProLiant BL e-Class Integrated Administrator User Guide for more information on security settings. -
Page 39: Dimms
CAUTION: Integrated Administrator security settings are assigned to server blade bays, not to server blades. If server blades change locations within the enclosure, Integrated Administrator settings must also be adjusted to ensure accurate security. Refer to the HP ProLiant BL e-Class Integrated Administrator User Guide for more information on security settings. -
Page 40: Removing A Dimm
DIMM 2 are probably face-down. Figure 2-20: DIMM socket keys for the ProLiant BL10e server blade HP ProLiant BL e-Class System Maintenance and Service Guide 2-25 HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 41: Dimm Socket Keys For The Proliant Bl10E G2 Server Blade
Figure 2-22: Replacing a DIMM 3. Repeat step 2 to install a second DIMM into DIMM slot 2. 2-26 HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 42: Hard Drive Assembly
2. Remove the server blade from the enclosure. See the “Removing a Server Blade from the Enclosure” section in this chapter. HP ProLiant BL e-Class System Maintenance and Service Guide 2-27 HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 43: Center Wall Assembly
CAUTION: Integrated Administrator security settings are assigned to server blade bays, not to server blades. If server blades change locations within the enclosure, Integrated Administrator settings must also be adjusted to ensure accurate security. Refer to the HP ProLiant BL e-Class Integrated Administrator User Guide for more information on security settings. -
Page 44: Swapping The Interconnect Tray
“Integrated Administrator Module” section in this chapter. 3. Place the replacement interconnect tray on a level, nonconductive surface. HP ProLiant BL e-Class System Maintenance and Service Guide 2-29 HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 45: Installing The Integrated Administrator Module Onto The Interconnect Tray
7. Replace the interconnect tray. See the “Removing the Interconnect Tray” section in this chapter. 2-30 HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM... -
Page 46: Diagnostic Tools
This chapter is an overview of hardware, software, and firmware diagnostic tools that are available for configuring, monitoring, and managing ProLiant BL e-Class systems. HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:04 PM... -
Page 47: Diagnostic Software And Firmware Tools
Diagnostic Tools Diagnostic Software and Firmware Tools The ProLiant BL e-Class Integrated Administrator is a standard component of the HP ProLiant BL e-Class system. The Integrated Administrator provides enclosure health, server blade health, and remote server manageability. Integrated Administrator features are accessed from any network-based client using a supported Web browser. - Page 48 Deployment CD for instructions within: on installing the appropriate drivers. • Insight Manager 7 • Operating system-specific IML utilities continued HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:04 PM...
-
Page 49: Hardware Diagnostic Tools
Hardware Diagnostic Tools The HP ProLiant BL e-Class system offers the following server blade and server blade enclosure hardware diagnostic tools. Diagnostic Adapter Use the diagnostic adapter to attach peripheral devices to any individual server blade for local server blade diagnosis and management. -
Page 50: Installing A Diagnostic Adapter
USB devices are hot-plug supported and do not require restarting the server blade after attachment. HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:04 PM... -
Page 51: Null-Modem Cable Pin-Out
Table 3-2: Cable Pin-Out for a Null-Modem Cable Signal Name EM PIN DB-9 PIN DB-25 PIN 1 & 6 6 & 8 HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:04 PM... -
Page 52: Connectors, Switches, And Leds
This section explains the location and function of rear panel connectors associated with the ProLiant C-GbE Interconnect Switch, RJ-21 patch panel, and RJ-45 patch panel interconnect trays. HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:07 PM... -
Page 53: Proliant C-Gbe Interconnect Switch Connectors
Integrated Administrator module. Connecting an unsupported external device to the enclosure link (RJ-45) connecters may damage your external device. HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:07 PM... -
Page 54: Rj-21 Patch Panel Connectors
Integrated Administrator module. Connecting an unsupported external device to the enclosure link (RJ-45) connecters may damage your external device. HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:07 PM... -
Page 55: Rj-45 Patch Panel Connectors
Integrated Administrator module. Connecting an unsupported external device to the enclosure link (RJ-45) connecters may damage your external device. HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:07 PM... -
Page 56: Fan Cable Connector On The Center Wall Assembly
Use Figure 4-5 to identify the connector on the server blade backplane for the enclosure status cable. Figure 4-5: Enclosure status cable connector on the server blade backplane HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:07 PM... -
Page 57: Server Blade Connectors
Figure 4-6: Identifying the server blade connectors Table 4-4: Server Blade Connectors Item Description Center wall assembly connectors Diagnostic connector HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:07 PM... -
Page 58: Diagnostic Adapter Connectors
Item Description Keyboard connector (PS/2) Mouse connector (PS/2) USB 2 connector USB 1 connector Serial connector Video connector HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:07 PM... -
Page 59: Switches
Server blade power button Powers up or down a server blade. (Hold down for 4 seconds to perform an emergency shutdown.) HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:07 PM... -
Page 60: Rear Panel Switches
HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:07 PM... -
Page 61: Maintenance Switch
Reserved* Configuration lock Password clear Invalidate configuration* * To access redundant ROM, set S1 and S4 to on. Refer to the HP ProLiant BL e-Class System Setup and Installation Guide. 4-10 HP ProLiant BL e-Class System Maintenance and Service Guide... -
Page 62: Leds
Enclosure degraded: Redundant component has failed Enclosure critical: Immediate attention required, enclosure at risk of down time HP ProLiant BL e-Class System Maintenance and Service Guide 4-11 HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:07 PM... -
Page 63: Enclosure Rear Panel Leds
Enclosure No power to enclosure power Amber Enclosure shutdown; power available; hibernate Green Enclosure power on continued 4-12 HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:07 PM... - Page 64 Network activity Yellow Port disabled No network link Connector Green 1000 Mbps speed Yellow 100 Mbps 10 Mbps HP ProLiant BL e-Class System Maintenance and Service Guide 4-13 HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:07 PM...
-
Page 65: Rear Panel Leds With The Rj-21 Patch Panel Interconnect Tray
Enclosure No power to enclosure power Amber Enclosure shutdown; power available; hibernate Green Enclosure power on continued 4-14 HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:07 PM... - Page 66 Enclosure off, Integrated Administrator Administrator health good health Green Enclosure on, Integrated Administrator health good Amber Integrated Administrator critical HP ProLiant BL e-Class System Maintenance and Service Guide 4-15 HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:07 PM...
-
Page 67: Rear Panel Leds With Rj-45 Patch Panel Interconnect Tray
Power supply OK fault Amber No AC power or over-voltage or over- temperature Blinking amber Current limit continued 4-16 HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:07 PM... -
Page 68: Fan Health Leds
Use Figure 4-15 and Table 4-13 to identify the LEDs on the hot-plug fans. Figure 4-15: Hot-plug fan health LEDs HP ProLiant BL e-Class System Maintenance and Service Guide 4-17 HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:07 PM... -
Page 69: Server Blade And Diagnostic Adapter Leds
LEDs on the server blade and the diagnostic adapter are identical in function and location. Figure 4-16: Server blade LEDs 4-18 HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:07 PM... -
Page 70: Diagnostic Adapter Leds
Connectors, Switches, and LEDs Figure 4-17: Diagnostic adapter LEDs HP ProLiant BL e-Class System Maintenance and Service Guide 4-19 HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:07 PM... -
Page 71: Server Blade And Diagnostic Adapter Leds
Enclosure on and health good Green Server blade power turned on Blinking green Server blade in standby 4-20 HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:07 PM... -
Page 72: Specifications
RJ-45 patch panel • ProLiant BL10e and ProLiant BL10e G2 server blade components — Memory — ATA hard drive assembly HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:10 PM... -
Page 73: Proliant Bl E-Class Server Blade Enclosure
In a non-operating mode, the chassis must be able to withstand humidity of 10% to 95% relative humidity (non-condensing) across the temperature range. HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:10 PM... -
Page 74: Hot-Plug Power Supply
12.1 V - 0.5 A ~ 38 A 5 Vaux – 0.2 A ~ 8 A Maximum peak power 700 W HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:10 PM... -
Page 75: C-Gbe Interconnect Switch Interconnect Tray
Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude minimum for storage is 70 KPa. continued HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:10 PM... - Page 76 Table 5-3: C-GbE Interconnect Switch Interconnect Tray Specifications continued Feature Description Wet bulb temperature Operating 28°C (82.4°F) Non-operating 38.7°C (101.7°F) HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:10 PM...
-
Page 77: Rj-21 Patch Panel Interconnect Tray
Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude minimum for storage is 70 KPa. HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:10 PM... -
Page 78: Rj-45 Patch Panel Interconnect Tray
Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude minimum for storage is 70 KPa. HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:10 PM... -
Page 79: Server Blade Components
Note: Use only 128-MB, 256-MB, or 512-MB, 72-bit wide, 3.3 V, registered ECC SDRAM. SDRAM can be either 100 or 133 MHz. Use HP SDRAM only. HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:10 PM... -
Page 80: Ata Hard Drive Assembly
256 MB Note: Use only 128-MB, 256-MB, or 512-MB, 72-bit wide, 3.3 V, registered ECC DDR SDRAM. SDRAM can be either 100 or 133 MHz. Use HP DDR SDRAM only. ATA Hard Drive Assembly Table 5-9: ATA Hard Drive Assembly Specifications... -
Page 81: Index
LEDs 4-12, 4-14, 4-17 server blade battery 1-5 power button 4-9 server blade blank 1-5 powering up 2-11 removing 2-15 HP ProLiant BL e-Class System Maintenance and Service Guide Index-1 HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:16 PM... - Page 82 4-12 help resources ix enclosure unit identification 4-11, 4-13, 4-15, hot surfaces 4-17 warning 2-2 fan 4-17 Index-2 HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:16 PM...
- Page 83 2-14 spare part number 1-5 reset button 4-9 specifications 5-4 RJ-21 patch panel connectors 4-3 LEDs 4-14 HP ProLiant BL e-Class System Maintenance and Service Guide Index-3 HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:16 PM...
- Page 84 5-10 weight specifications rack 2-3 DIMM 5-10 warnings 2-3 enclosure 5-2 hard drive 5-11 Index-4 HP ProLiant BL e-Class System Maintenance and Service Guide HP CONFIDENTIAL Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:16 PM...