Safety; Repeating Symbols - Rotax 912 series Operator's Manual

4) Safety

Although the mere reading of these instructions will not eliminate a hazard, the
understanding and application of the information herein will promote the proper use
of the engine.
The information and components-/system descriptions contained in this Operator's
Manual are correct at the time of publication. ROTAX
of continuous improvement of its products without imposing upon itself any
obligation to install them on its products previously manufactured.
ROTAX reserves the right at any time to discontinue or change specifications,
®
designs, features, models or equipment without incurring obligation.
The illustrations in this Manual show the typical construction. They may not
represent in full detail or the exact shape of the parts which have the same or similar
function.
Specifications are given in the SI metric system with the USA equivalent in
parenthesis. Where precise accuracy is not required, some conversions are
rounded off for easier use.
This document has been translated from the German language and the original
German text shall be deemed authoritative.
4.1)

Repeating symbols

This Manual uses the following symbols to emphasize particular
information:
WARNING:
ATTENTION: Denotes an instruction which, if not followed, may
NOTE:
Effectivity: 912 Serie
OM initial issue
Identifies an instruction which, if not followed, may
cause serious injury including the possibility of death.
severely damage the engine or other component.
Indicates supplementary information which may be
needed to fully complete or understand an instruction.
AIRCRAFT ENGINES
however, maintains a policy
®
page 4 - 1
July 01/98