Technical Documentation - Rotax 912 series Operator's Manual

4.3)

Technical documentation

The information given in the
Installation Manual
Operator's Manual
Collective Manual
Maintenance Manual
ICR-Manual (Inspection, Clean and Repair Manual)
Overhaul Manual
Illustrated Parts Catalog
Technical Bulletins
Service Information
are based on data and experience that are considered applicable for
professionals under normal conditions.
The fast technical progress and variations of installation might render
present laws and regulations inapplicable or inadequate.
The illustrations in this Manual are mere sketches and show a typical
arrangement. They may not represent the actual part in all its details but
depict parts of the same or similar function. Therefore deduction of
dimensions or other details from illustrations is not permitted.
All necessary documentation is available from the ROTAX Distribution-
and Service Centers (see Chapter 14).
NOTE:
Effectivity: 912 Serie
OM initial issue
The Illustrations in this Operator´s Manual are stored in
a graphic data file and are provided with a consecutive
irrelevant number.
This number (e.g. 00277) is of no significance for the
content.
AIRCRAFT ENGINES
page 4 - 5
July 01/98