www.seagullmodels.com
HINGING THE RUDDER.
Glue the rudder hinges in place using the
same techniques used to hinge the ailerons.
1) Attach the plastic wing tip to the wing. Use a
hobby knife to remove the covering at the wing
end.
Remove covering.
Hinge.
2) Apply the epoxy to the surface of both wing
WING TIP ASSEMBLY.
tip and wing end. The plastic wing tip is held in
position and install it to the wing end. Please
see pictures shown.
Covering.
Fill epoxy.
Wing tip.
Install plastic wing tip to wing end.
5