Mounting The Tail Wheel; Wing Fillet Installation - Seagull Models YAK 52 Assembly Manual

2) Install servos arm to servos. Notice the
position of the servo arms on the servos. See
picture below.
Elevator.

MOUNTING THE TAIL WHEEL.

Locate items necessary to install tail gear.
M3x25mm.
M3x25mm.
M3x30mm.
www.seagullmodels.com
Rudder.
Throttle.
M3x30mm.
Rudder.
22mm.
M3x30mm.
A
C/A glue.
A
Tail landing gear.

WING FILLET INSTALLATION.

Spring.
31