Parameter Lists; Display Values; Inverter Meters (110#) - SMA SUNNY ISLAND 4548-US Operating Manual

19 Parameter Lists

19 Parameter Lists

Only parameters in the menu branches "200 Settings" and "500 Operation" can be changed. All
other values are only shown on the display of the SI 4548-US-10 / 6048-US-10. All menu items that
can only be changed by the installer using a password are shaded in gray in the following tables.
Menu structure depends on system configuration
Depending on the set system configuration, individual menu items may be missing.
Interference during operation due to incorrect parameter settings
Use caution when setting parameters. Incorrect settings can lead to faulty operation of the
inverter. Take note of the original values of all parameters that you change.

19.1 Display Values

19.1.1 Inverter Meters (110#)

111# Inverter Total Meters
No. Name
01 TotInvPwrAt
02 TotInvCur
03 TotInvPwrRt
112# Inverter Device Meters
No. Name
01 InvOpStt
02 InvPwrAt
03 InvVtg
04 InvCur
158 SI4548-6048-US-BE-en-21
Description
Total active power of the inverters (cluster) in kW
Total current of the inverters (cluster) in A
Total reactive power of the inverters (cluster) in kVAr
Description
Operating state of
the Sunny Island
Active power
Sunny Island in kW
Voltage of the
Sunny Island in V
Current of the
Sunny Island in A
SMA Solar Technology America LLC
Value clear Explanation
text (No.)
Standby (2) Standby
Run (3) Operation
Run (4)/ Emergency charge mode
EmCharge
Error (5) Error
Manual (6) Manual Operation
Startup (7) Transfer standby > operation
Operating Manual