Entering A User Password - Konica Minolta 3240 User Manual

Basic Operations

Entering a User Password

A user password is required only when the Electronic Copy Monitor (ECM) feature is activated; a
User Password is assigned; and "Enter E.C.M. password" is displayed on the screen.
1 Enter your 5-digit password, using the keypad.
If the password is invalid, the copier will reset to the initial mode.
In that case, enter the correct password; or contact the key operator.
2 Press [START PRINT].
The current Copy Count will be displayed for a few seconds.
If your Copy Limit is reached or exceeded, "Copy limit reached" will be displayed.
In that case, contact the key operator to reset your copy limit.
3 Make copying selections, and enter print quantity, as required.
4 When all settings are acceptable, press [START PRINT].
Basic Operations 5-17