Applications
Moisture Paper
The Moisture Paper feature enables you to control copy quality when the copy paper has been
stored in high humidity. The icon for Moisture Paper will be displayed on the Application
Selection screen shown below, only if the feature is turned ON in the Key Operator setting mode.
NOTE: Do not use the Moisture paper mode for low humidity paper.
Incompatible: OHP Interleave
1
Press [APPLICATION] to enter the Application selection screen.
2
Press [F4] to align the arrow to the "Moisture Paper", and press [OK]. The "Moisture
Paper" indicator will be highlighted.
3
Press [OK] to complete the setting and return to the Basic screen.
Application selection screen
Applications 8-23