Konica Minolta 3240 User Manual page 150

Maintenance
Inserting a New Staple Cartridge
ST-217 In-Bin Stapler
When staples are empty in sorter, the Replace staple cartridge message displays on the LCD
screen.
Removing the Empty Cartridge and Inserting a New Staple Cartridge
1 Pull the release lever upward, and move the ST-217 In-Bin Stapler Sorter to the left.
2 Gently pull the empty cartridge upward, and withdraw it.
3 Remove the stopper from the new cartridge while holding the cartridge with the tip (claw
portion) upward. Also remove the red tape from the new cartridge.
4 Insert cartridge in correct position, then push it down. Return sorter to original position.
5 Before using the new staple cartridge, perform a manual stapling test (see p. 10-9).
10-8 Maintenance