Konica Minolta 3240 User Manual page 115

Key Operator Mode
ECM (Electronic Copy Monitor) Setting [3] (continued)
Password Setting [1] (continued)
7 Press [OK]. "search" indicator will be highlighted.
8 Press [F1 (search)] to check that the input password is not duplicated.
When the same password has not been used for another account number, "Password not
used" will be displayed.
If searching is not necessary, simply proceed to step 9.
When the same password has been used for another account number, "Password used/
input new No." will be displayed.
Enter a 5-digit password again, press [OK], and press [F1 (search)].
Note: It is possible to assign the same password to different account numbers. Note, however, that the number of
copies will be counted only for the password with the smallest account number. Copy count for the other
accounts will not be monitored. We recommend that you do not use duplicate passwords.
9 Check the account number and password displayed in the second line of the message
display.
Note: We recommend that you make a list of all passwords and account numbers.
10 If no further changes are required, proceed to step 14.
11 Press [F3 (No.)] if you want to enter another password.
12 If other ECM setting are required, press [P] to return to the ECM setting menu screen.
Press [F1 ( )] and [F2 ( )] to select another desired menu item, from [1]~[5].
13 If no other ECM settings are required, press [F4 (PREV)] to restore the Key operator mode
screen.
14 Turn power OFF.
15 Turn the copier power switch back ON to perform copying operations.
9-16 Key Operator Mode