Copying Tips - Konica Minolta 3240 User Manual

Troubleshooting

Copying Tips

COPIER DOES NOT OPERATE WHEN POWER SWITCH IS ON
Fully insert paper trays.
Close RADF.
Check to be sure power plug is firmly inserted in electrical socket.
COPY IMAGE IS TOO LIGHT
Manually adjust copy density to darker density.
Check the message area of the Basic screen and add toner, if required.
Check paper for dampness. Do not leave paper in copier when humidity is high. Or, Use the
Moisuter paper mode.
COPY IMAGE IS TOO DARK
Manually adjust copy density to lighter density.
Check to see if Photo or Photo-Text mode is required.
COPY IMAGE IS NOT CLEAN OR SHOWS SPOTS
Use clean originals since dirt marks may be copied.
Keep Platen glass and inner surface of document cover clean.
Call for service if the "Call for PM" is displayed in the message area.
Check density indicator and lighten if required.
COPY PAPER MISHANDLES DURING COPYING
Fan copy paper and load it with edges curling upward. Do not exceed the tray capacity.
COPY IMAGE CAN BE RUBBED OFF
Check copy paper thickness. Use Heavy Stock mode, if paper weight requires it.
MAGNIFICATION CANNOT BE CHANGED
Reduce & Shift is incompatible with magnification.
Press [AUTO RESET] key and set desired copying conditions without using Reduce & Shift.
DUPLEX MODES CANNOT BE SELECTED
Fully close ADU and RADF, then select Duplex mode again.
Automatic Duplex copying is not available in Interrupt mode.
11-14 Troubleshooting