Positioning Originals - Konica Minolta 3240 User Manual

Paper Information
Using the Reversing Automatic Document Feeder (RADF) (continued)

Positioning Originals

The document feeder (RADF) automatically feeds up to 50 originals directly to the platen glass,
starting with the top sheet. The RADF should only be used for unstapled, unfolded, smooth, flat
originals.
Original size detection requires accurate paper guide adjustment
APS detects size 11"x17", 8.5"x14", 8.5"x11" and 8.5"x11"R
Size weight, capacity are specified for all copy modes on p. 4-3
Before placing originals in the tray, be sure the document feeder is closed fully.
1 Position original(s) face down on the document feeder tray.
• Place two-sided originals with page one face down.
• If necessary, open the tray extension to support large originals.
2 Adjust paper guides.
4-4 Paper Information