Konica Minolta 3240 User Manual page 169

Troubleshooting
Copying Tips (continued)
COPYING DOES NOT BEGIN AFTER PRESSING START PRINT
Insert or adjust the appropriate paper tray for copy size selected
Close document cover firmly.
Close front door completely.
COPYING DOES NOT RESUME AFTER MISHANDLED PAPER IS REMOVED
Check copier diagram on LCD screen for additional indications of mishandled paper.
COPY QUALITY IS POOR
Check paper for dampness, and replace if necessary.
THE ORIGINAL PAPER IS MISHANDLED OR SKEWED IN THE DOCUMENT FEEDER
Originals should conform to the recommended size and weight.
Be sure originals are not stapled.
Align originals evenly in the RADF.
Check to make sure paper guides meet the width of mixed size originals.
COPY IMAGE IS SKEWED WHEN BYPASS IS USED
Be sure copy paper is inserted straight.
USING ECM, COPIES CANNOT BE MADE AFTER PASSWORD IS ENTERED
Check to see if the message "Exceed limit" is displayed.
Contact key operator to reset limit.
SORTER DOES NOT OPERATE
Press [SORT]/ [GROUP]/ [STAPLE] key.
Remove paper misfeed, if any.
RADF INDICATOR WILL NOT LIGHT AFTER AUTO/RESET IS PRESSED
Fully close RADF.
RADF LIGHT IS FLASHING
The document feeder is ready to accept originals.
Insert originals on RADF tray, press [AUTO RESET] key, then [START PRINT] key.
ADD TONER MESSAGE IS DISPLAYED
New toner supply is needed. Follow instructions for adding toner.
Troubleshooting 11-15