Fortinet fortivoice Administrator's Manual page 47

Figure 16:DHCP server configuration
GUI field
Network Interface
Setting
Advanced Setting
Fortinet Technologies Inc.
Description
ID The system will generate an ID for this configuration. This is view
only.
Enabled Select to enable the DHCP server.
Interface Select an interface for the DHCP server from the drop-down list.
If this FortiVoice is in HA mode, make sure that the slave unit has
the same interface as the master unit. For information on HA,
see
Gateway Enter the IP address of the default gateway that the DHCP
server assigns to DHCP clients.
DNS options Select to use either a specific DNS server or the system's DNS
settings.
If you select a specific DNS server, enter the Primary DNS server
and the Secondary DNS server fields.
For more information, see
Domain Enter the domain that the DHCP server assigns to its clients.
Netmask Enter the netmask of the addresses that the DHCP server
assigns.
"Using high availability" on page
"Configuring DNS" on page
Page 47 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
53.
46.