Fortinet fortivoice Administrator's Manual page 246

Profile Name
Server
Port
Level
Facility
2. Click New to create a new entry or double-click an existing entry to modify it.
A dialog appears.
Figure 91: Remote host configuration dialog
GUI field
Log to Remote Host
Fortinet Technologies Inc.
Displays the remote host name.
Displays the IP of the Syslog server or FortiAnalyzer unit.
Displays the port on the Syslog server or FortiAnalyzer unit.
Displays the minimum severity level for logging purposes.
Displays the facility identifier the FortiVoice unit uses to identify itself.
Description
Enable Select to allow logging to a remote host.
Name Enter a name for the remote host.
IP Enter the IP address of the Syslog server or FortiAnalyzer unit
where the FortiVoice unit will store the logs.
Level Select the severity level that a log message must equal or exceed
in order to be recorded to this storage location.
For information about severity levels, see
levels" on page
Port If the remote host is a FortiAnalyzer unit, enter 514; if the remote
host is a Syslog server, enter the UDP port number on which the
Syslog server listens for connections (by default, UDP 514).
242.
Page 246 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
"Log message severity