Use IR Pins
Consult your IR peripheral documentation to select the correct setting of the TxD and RxD signals.
This field only configurable if "UART Mode Select" is set to "ASKIR" or "IrDA".
Options: Full、Half (default)
Onboard Parallel Port
Select an address and corresponding interrupt for the onboard parallel port.
Options: 378/IRQ7 (default)、278/IRQ5、3BC/IRQ7、Disabled
Parallel Port Mode
This option allows you to select an parallel port mode for the on board parallel po
Options: ECP(default)
EPP
SPP
ECP+EPP
Normal
EPP Mode Select
Select EPP port type 1.7 or
or "ECP+EPP". Options: E
ECP Mode Use DMA
S
elect a DMA Channel for the parallel port when
co
nfigurable if "Parallel Port Mode" is set to "ECP". Options: 3 (default)、1
Game Port Address
Game Port I/O Address. Options: 201 (
Midi Port Address
Midi Port Base I/O Address. Options: 330、300 (default)、290、Disabled
Midi Port IRQ
This determines the IRQ that th
Extended Capabilities Port.
Enhanced Parallel Port.
Standard Printer Port.
E
CP & EPP mode.
1.9. This field is only configurable if "Parallel Port Mode" is set to "EPP"
PP 1.9(default)、EPP 1.7
、209、Disabled
default)
e Midi Port will use. Options: 5、10 (default)
33
PX865PEL-800
rt.
using the ECP mode. This field is only