Headers & Jumpers; Case Open - Albatron PX865PEL-800 Instruction Manual

Headers & Jumpers
Case Open Warning Jumper: C
This connector is used to notify the user when the computer case has been previously opened. To
configure this functionality, your computer case must be equipped with a " case open" cable which
you need to attac h to the CASE OPEN jumper. Also, you must enable CASE OPEN warning
fu nctionality in the BIOS setup utility. When your computer case is opened, your system will display
alert messages upon boot up. Note that your computer case must be equip
cable.
Caseop-
Ground

CASE OPEN

Front USB Headers: USB2/ USB3
You can connect the USB bracket to the USB2/ USB3 header. There are some USB ports attached to
the bracket. That means you can connect the USB devices to the bracket. And the mainboard
supports up to six USB devices.
5VSB
DATA_A-
DATA_A+
Ground
NC
USB2/3
U SB bracket (optional)
You can connect the USB bracket to the USB2/ USB3 header.
* If you are using USB 2.0 devices with Windows 2000/ XP, you will need to install the USB 2.0
d river from the Microsoft
1
2
1 2
5VSB
DATA_B-
DATA_B+
Ground
NC
9 10
®
website.
14
PX865PEL-800
ASE OPEN
ped with a "case open"