Albatron PX865PEL-800 Instruction Manual page 31

Factory Default
"CPU Host Frequency"
100
133
200
To determine your new frequencies, you must first take the factory default "CPU Host Frequency"
and then determine the corresponding formu
"C PU Host Frequency" setting and apply it to the formulas to arrive at your new frequencies.
For example, if your facto ry default "CPU Host Frequency" was 100, and you reset the "CPU Host
Frequency" to 133, your AGP, PCI and SRC frequencies will be as follows:
AGP Frequency = 133 / 1.5 = 88.67
PCI Frequency = 133 / 3
SRC Freque ncy = 133 / 1
Default CPU Volt age (Volt)
This item displays t he CP U default Voltag
C PU Voltage (Volt)
This item allows you to adjust your CPU
Options: Default+0.3V、Default+0.2V、De
AGP Voltage (Volt)
This item allows you to adjust the AGP Voltage. Options: Default+0.1V、Default (default)
D DR Voltage (Volt)
This item allows you to adjust the RAM voltage
Options: Default+0.3V、Default+0.2V、Default+0.1V、Default (default)
AGP frequency
PCI frequency
SRC frequency
AGP frequency
PCI frequency
SRC frequency
AGP frequency
PCI frequency
SRC frequency
las according to the table above. Second, take the current
= 44.33
= 1 33.0
e.
core voltage.
fault+0.1V、Default (default)
.
28
PX865PEL-800
Formulas
= current CPU Host Frequency / 1.5
= cur rent CPU Host Frequency / 3
= cu rrent CPU Host Frequency / 1
= current CPU Host Frequency / 2
= current CPU Host Frequency / 4
= current CPU Host Frequency / 1.33
= curren t CPU Host Frequency / 3
= current CPU Host Frequency / 6
= current CPU Host Frequency / 2