Table of Contents
Advertisement
OS Select For DRAM > 64MB
Select "OS2" only if you are running the OS/2 operating system with greater than 64MB of RAM.
Options: Non-OS2 (default)、OS2
HDD S.M.A.R.T. Capability
Self Monitoring Analysis and Reporting Technology is a technology that enables a PC to attempt to
predict the possible failure of storage drives. Options: Disabled (default)、Enabled
Small LOGO (EPA) Show
This item allows you to show or hide the small LOGO EPA. Options: Disabled (default)、
A
dvanced Chipset Features
DRAM Timing Selectable
This item determines DRAM clock/ timing
Make sure your memory
mod
option. Options: Manual、
CAS Latency Time
This item determines CAS Latency. When synchronous DRAM is installed, the number of clock
cycles of CAS latency depends on the DRAM timing. Do not reset th
specified by the system designer. This
se
t to "Manual". Options: 2、2.5、3 and By SPD (default)
Active to Precharge Delay
This item allows you to select DRAM Active to Precha
O
ptions: 8、7、6、5 and default is by SPD
DRAM RAS# to CAS# Delay
T
his item allows you to select a delay time between the CAS and RAS strobe signals. It only applies
when DRAM is written to, read from,
Timing Selectable"
is set to "manual". Options: 4、3、2 and default is by SPD
DRAM RAS# Precharge
T
his item allows you to select the DRAM RAS# precharge time. The ROW address strobe must
precharge again before DRAM is refreshed. A
data. This field is adjustable only when "DRAM Timing Selectable" is set to "manual".
Options: 4、3、2 and By SPD (default)
using SPD or manual configuration.
ule has SPD (Serial Presence Dat
By
SPD (default)
field is adjustable only when "DRAM Timing Selectable" is
or refreshed. This field is adjustable only when "DRAM
n inadequate configuration may result in incomplete
24
PX865PEL-800
a), if you want to select the "By SPD"
is field from the default value
rge Delay.
Enabled
Advertisement
Table of Contents
