Outboard Motor; Flushing Device; Installing Top Cowling - Yamaha F150 Owner's Manual

(2) Remove the oil dipstick and wipe it
clean.
1. Oil dipstick
(3) Insert the oil dipstick completely and re-
move it again.
(4) Check that the oil level on the oil dipstick
is between the upper and lower marks.
Consult your Yamaha dealer if the oil lev-
el is not at the proper level or if it appears
milky or dirty.
1
1. Oil dipstick
2. Upper mark
3. Lower mark
EMU40412

Outboard motor

 Check that the outboard motor is mounted
properly and check the outboard motor
mounting bolts for looseness.
 Check the propeller for damage.
 Check for engine oil leaks.
EMU36494

Flushing device

Check that the flushing device's garden hose
connector is securely screwed on to the fit-
1
ting on the bottom cowling. NOTICE: If the
garden hose connector is not properly
connected, cooling water can leak out and
the engine can overheat during operation.
[ECM01802]
1. Fitting
2. Garden hose connector
3. Flushing device
2
EMU40752

Installing top cowling

(1) Check the rubber seal for damage. If the
rubber seal is damaged, have it replaced
by a Yamaha dealer.
3
2
1. Rubber seal
2. Bottom cowling
(2) Check that the rubber seal is seated all
the way around the bottom cowling.
Operation
3 3 2 2 1 1
1
49