Troubleshooting; Fuses; Check List - Shoprider Grande TE-9AS User Manual

Troubleshooting

Your scooter is fitted with the latest in electronic controls that are programmed to
protect the electrical system from abnormal overloads.

Fuses

There are two fuses on the battery cables to give protection against possible overload
on the wiring.

Check List

If your scooter fails to operate, please check the following:
 The unit is switched on.
 All plugs and connections are firmly fixed.
 Battery level shows full charge.
 Freewheeling device is in the drive position.
 Circuit breaker has not tripped.
If the freewheel device has been operated with the scooter switched on, the scooter
will not operate until the key switch has been turned off and on again.
Note: Should your scooter fail to operate after checking these possible problems,
consult your local SHOPRIDER dealer immediately.
If the scooter is switched on and not operated for a period of time (approx 10 minutes) it
may enter 'sleep' mode. Simply switch the scooter off and on to reset the controller.
16