Brake Release / Freewheel Operation - Shoprider Grande TE-9AS User Manual

Continued.....
USB Port
The USB Port (Output DC 5V, 2.1A Max.) is located on the right side tiller cover for the
convenience of charging a USB device such as mobile phone.
For your own safety, please be careful if the USB port is used for charging your device
while driving. Continued use for charging will use battery power and could reduce the
overall range of the scooter.

Brake Release / Freewheel Operation

The yellow–– brake release lever is situated at the right rear of the scooter. This lever
allows you to disengage the drive mechanism and push the scooter in 'freewheel'
mode. To disengage the drive, push the lever to the floor. The scooter can now be
pushed.
Simply pull the lever up to re-engage the drive mechanism (the scooter can now be
driven). The scooter will not operate when the lever is in the disengaged position. The
scooter must be turned off and on by the key switch to reset the circuits before it will
resume normal operation.
Always ensure the lever is fully re-
engaged before driving.
11