Moving Off; Steering; Reversing; Ramps / Slopes - Shoprider Grande TE-9AS User Manual

Continued.....

Moving Off

Insert the key and switch on the power and initially set the speed control to a low
setting. The further you pull the lever the faster the scooter will travel, but only to the
maximum speed that has been selected. Release the lever and the scooter will come
to a smooth controlled stop.
Caution! DO NOT switch off the power to stop the scooter as this will cause the
transmission to lock and the scooter will come to a sharp stop, which could possibly
cause injury. This procedure should only be used in an emergency.

Steering

Steering the scooter is light and easy. Ensure you give obstacles a wide clearance to
avoid the rear wheels catching. When steering through limited spaces, turn the tiller in
the direction that you wish to go and apply power gently. The scooter can turn very
tightly with complete stability at slow speeds.
Caution! NEVER turn sharply at high speeds as it can make the scooter unstable. The
maximum speed should be set at 50%.

Reversing

Before reversing ensure the area behind the scooter is free from any obstacles or
hazards. Adjust the speed setting to low before you reverse. Steer wide of all corners
and obstacles.
Caution! Do not reverse onto a main thoroughfare.

Ramps / Slopes

The stability of your scooter depends on several factors such as seat height, angle of
gradient and the users height and weight. When approaching an incline, do so directly
and not at an angle and avoid making turns where possible.

Surfaces

Your scooter will perform well over many surfaces. However, avoid long grass, loose
gravel, sand, mud and ice.

Transferring

Lift up the armpad from the side you wish to leave or sit on the scooter. Use an aid for
balance if required. DO NOT use the tiller or armrests to support the full weight during
transfers.
13