Tiller Controls - Shoprider Grande TE-9AS User Manual

Table of Contents

Advertisement

Tiller Controls

Maximum Speed Knob
The speed control enables you to set the maximum speed of the scooter. Turn clockwise
to increase the maximum speed and anti-clockwise to decrease. Always start at a slow
speed until accustomed with the characteristics of your scooter. Do not put excessive
pressure on the dial. Only turn as far as the stops.
When driving in pedestrian areas such as shopping precincts and busy pavement areas
always respect other pedestrians and turn the maximum speed down so that the
scooter travels at the walking pace of others around you.
Battery Level Indicator Gauge
This gauge gives you a guide to the amount of charge left in the scooters batteries. This
will give the truest reading when the scooter is in motion. Always fully charge the
batteries before driving your scooter and never let the batteries become completely
drained, as this may cause permanent damage to the batteries.
Hazard Indicators
Pressing the button will activate the hazard warning lights. All indicators will flash on & off
simultaneously until the button is pressed again.
Right / Left Indicators
To operate the direction indicators, press either the right / left button to indicate your
intended manoeuvre. The button should be pressed a second time to cancel the
indicator.
Lights
Pressing the button will turn on the headlights and rear lights. Press again to switch off.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents