Scan Using Scan To Network Profiles - Brother ADS-2000e User Manual

Scan Using the Control Panel

Scan Using Scan to Network Profiles

1
Load your document.
2
Swipe left or right, or press d or c to display Scan 1.
3
Press to Network.
4
Press a or b to choose one of Network server profiles listed.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the profile on the LCD.
Press OK.
Do one of the following:
 If the Scan to Network profile is complete, go to 7.
 If the Scan to Network profile is not complete, go to 5.
5
Press Options.
6
Choose the settings for 2-sided Scan, Scan Type, Resolution, File Type, Document Size,
File Size, Auto Deskew, Skip Blank Page and User Name as needed. Press OK.
NOTE
• If you choose Secure PDF for File Type, the machine will ask you to enter a 4 digit password using
numbers 0-9 before it starts scanning.
• If you choose Signed PDF for File Type, you must install and then configure a certificate to your
machine using Web Based Management.
• If you want to save the settings as a shortcut, press Save as Shortcut.
7
Press Start.
The LCD displays Connecting. When the connection to the Network is successful the machine starts
the scanning process.
6
6
137