Brother ADS-2000e User Manual page 171

Scan Using the Control Panel
Setting Description
Plastic Card Mode Scan non-embossed cards, such as driver's licenses or
insurance cards, using these automatic settings:
 Resolution: 600 x 600 dpi
 Document Size: 2 in 1 (Auto)
 Auto Deskew: On
 2-sided Scanning: On (Short-edge binding)
Multifeed Detection: Off

 Auto Image Rotation: Off
NOTE
• If you want to scan a plastic card with different settings,
set Plastic Card Mode off, Resolution to 600 dpi, and
Multifeed Detection to Off.
• Load only one plastic card at a time.
5
Click the Advanced Settings button. The Advanced Settings dialog box appears.
6
Change the settings.
The following settings can be changed.
Setting Description
Brightness Adjust the setting (0 to 100) to get the best image. The
default value of 50 represents an average and is usually
suitable for most images. You can set the Brightness
level by dragging the slider to the right or left to lighten or
darken the image. If the scanned image is too light, set a
lower Brightness level and scan the document again. If the
image is too dark, set a higher Brightness level and scan
the document again.
Applicable Feature
Image OCR E-mail
Yes Yes Yes
Applicable Feature
Image OCR E-mail
Yes Yes Yes
File
Yes
6
File
Yes
158