Brother ADS-2000e User Manual page 118

Scan Using Your Computer
WIA Driver Settings
1 Paper source
You can select Document Feeder only.
2 Picture Type (Image Type)
Select Color picture, Grayscale picture, Black and white picture or text, or Custom Settings.
To change advanced settings, click Adjust the quality of the scanned picture.
Resolution

Select a scanning resolution from the Resolution text box. Higher resolutions take more memory and
transfer time, but produce a finer scanned image.
Brightness

Adjust the setting (-50 to 50) to get the best image. The default value of 0 represents an average and is
usually suitable for most images. You can set the Brightness level by dragging the slider to the right or
left to lighten or darken the image. You can also enter a value in the box to set the level. If the scanned
image is too light, set a lower Brightness level and scan the document again. If the image is too dark, set
a higher Brightness level and scan the document again.
 Contrast
Adjust the setting (-50 to 50) to get the best image. The default value of 0 represents an average and is
usually suitable for most images. You can increase or decrease the contrast level by moving the slider to
the right or left. An increase emphasizes dark and light areas of the image, while a decrease reveals more
details in gray areas. You can also enter a value in the box to set the Contrast.
1
2
5
5
105