Brother ADS-2000e User Manual page 172

Scan Using the Control Panel
Setting Description
Contrast Adjust the setting (0 to 100) to get the best image. The
default value of 50 represents an average and is usually
suitable for most images. You can increase or decrease
the contrast level by moving the slider to the right or left. An
increase emphasizes dark and light areas of the image,
while a decrease reveals more details in grey areas.
NOTE
The Contrast setting is only available when setting
Scan Type to Auto, Gray (Error Diffusion),
True Gray or 24bit Color.
Color Drop Deletes specific colors from your scan data.
Select one of the following:
 Chromatic colors
Use to drop all colors except Black.
 Red
Use to drop the Red color.
 Green
Use to drop the Green color.
 Blue
Use to drop the Blue color.
 Custom
Select the color that you want to remove.
Auto Deskew Corrects the skew (within 5 degrees) of the scanned data. Yes
Auto Image Changes the direction of the document based on the text
Rotation orientation.
Bleed Through Prevents bleedthrough on a two-sided document, and
Prevention/ also allows you to remove the base color of documents
Remove such as newspapers to make the scanned data more
Background Color recognizable.
Skip Blank Page Removes blank pages of the document from the scanning
results.
Multifeed Uses a ultrasonic sensor to detect when a multifeed has
Detection occurred. When this function detects a multifeed, confirm
that the data scanned before the multifeed has been
saved, and then start scanning again at the next page or
the beginning of the document.
Display Scanning Shows the numbers of total pages saved and blank pages
Results skipped on your computer screen.
7
Click OK.
8
Click OK to close the setting dialog box.
Applicable Feature
Image OCR E-mail
Yes Yes Yes
Yes Yes Yes
Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
File
Yes
Yes
6
Yes
Yes
Yes
Yes
Yes
Yes
159