Basic Safety Instructions; Symbols - Norton Clipper CS1 P13 Operating Instructions Manual

1 Basic Safety Instructions

The CS1 is exclusively designed for the cutting of floors made of asphalt, green and cured
concrete (reinforced or not) as well as of industrial cement.
Uses other than the manufacturer's instructions shall be considered as contravening the
regulations. The manufacturer shall not be held responsible for any resulting damage. Any risk
shall be borne entirely by the user. Observing the operating instructions and compliance with
inspection and servicing requirements shall also be considered as included under use in
accordance with the regulations.

1.1 Symbols

Important warnings and pieces of advice are indicated on the machine using symbols. The
following symbols are used on the machine:
Read operator's instructions Ear protection shall be worn
Rotation direction of the blade Never move the machine with the blade
running idle.
Emergency Stop Rotation direction of the blade
Danger: risk of cut
6