Table of Contents
Advertisement
3. Operation
3.12.8
Using the lifting/lowering switch
When attaching implements, using the lifting/lowering switch gives you a full
control on the implement's movement. If necessary, you can stop the movement
immediately by releasing the switch.
The lifting/lowering switch functions even when the rear linkage is not activated.
1
GUID-F1E65AD2-AB04-45E2-A851-4BDD243C087B
1. Lifting/lowering switch
•
To lift the linkage, press the symbol side of the lifting/lowering switch.
The longer the switch is pressed the faster the linkage lifts.
•
To lower the linkage, press the side of the lifting/lowering switch opposite to
the symbol.
The longer the switch is pressed the faster the linkage lowers.
•
To stop the movement of the linkage, release the lifting/lowering switch to the
centre position.
NOTE: The linkage has to be activated again every time the lifting/lowering
switch or the lifting/lowering push buttons have been used, if necessary.
3.12.9
Using the lifting/lowering push buttons
When using the lifting/lowering push buttons, the lifting/lowering continues for as
long as you keep pushing the respective button. The movement stops
immediately when releasing the button. Thus, you have steady control over the
linkage movements.
- 174 -
Advertisement
Table of Contents
