Running With Power Take-Off Driven Implements Or Machines; Using Ballast Weights - Valtra T144 Operator's Manual

GUID-8924D3B6-EBB0-42EC-B132-A9A189E79D81
1.2.5.8

Running with power take-off driven implements or machines

Read and follow the given instructions to use power take-off (PTO) driven
implements and machines safely.
• Use the prescribed safety devices and ensure that they are in good condition.
• Follow the directions given by the implement or machine manufacturer.
1.2.5.9

Using ballast weights

Use ballast weights according to the instructions when needed.
IMPORTANT: When using salt liquid as ballast weight in the wheels, the
manufacturer does not take the responsibility for the damages caused by salt.
• Use sufficient ballast weights.
• Mount ballast weights only at the points intended for this purpose.
DANGER: Serious accidents may occur due to failure to use the
prescribed safety devices.
WARNING: When driving on the road, at least 20% of the gross weight
of the tractor must be on the front axle. When lifting an implement, the
weight on the front end of the tractor is reduced and the steering ability
is impaired or sometimes lost.
- 31 -
1. Safety precautions