Driving Start Automatics; Activating And Deactivating The Driving Start Automatics - Valtra T144 Operator's Manual

3.8.20

Driving start automatics

3.8.20.1 Driving start automatics
Driving start automatics can be used to prevent the rear wheels from slipping
while starting to drive or when changing the driving direction with the power
shuttle. The driving start automatics engage the four-wheel drive automatically,
regardless of the level of wheel slip.
If the clutch pedal has been pressed while starting to drive or when changing the
driving direction, the four-wheel drive remains engaged until the clutch pedal is
fully released.
If the clutch pedal or HiShift push button has been pressed while driving, the
driving start automatics engages when releasing the clutch pedal or HiShift push
button.
NOTE: Driving start automatics operates only when the driving speed is under 10
km/h.
The driving start automatics is controlled from the A-pillar display by activating
and deactivating the function or setting the time that the four-wheel drive remains
engaged.
3.8.20.2

Activating and deactivating the driving start automatics

The driving start automatics is activated and deactivated through the A-pillar
display settings.
1. Press
2. Press
GUID-2408E592-046C-4CA8-AC4B-6E1939C132A7
Text "Ind" is shown.
to activate the A-pillar display.
to enter the settings menu.
- 135 -
3. Operation