3. Operation
1. Activate the setting mode.
Press and hold down the
is blinking.
2. Display the available parameters.
Press the side of the display setting switch opposite to the symbol. The
available parameters are presented in the following table.
Parameter
Implement width
Set clock
Clock mode
Direction indicator buzzer status
Temperature unit
Length unit
Volume unit
Front power take-off speed view
Front lower links' position view
Display contrast
3. Exit the setting mode.
Press the
3.10.5.2
Changing the parameter value
1
GUID-5847AA62-42CB-4FB8-9936-D7E6A7D2C2A6
1. Control panel for A-pillar display and Proline
•
Increase a parameter value.
•
•
button to save the value and return to the previous display.
Press the up arrow button.
The parameter value increases one step at a time.
Press and hold down the up arrow button.
The parameter value increases continuously.
- 152 -
button until the symbol for the value to be set
Parameter value
0–6 500
Hours and minutes
12–hour or 24–hour
On or off
Celsius or Fahrenheit
Metric or imperial
Litre or UK gallon or US gallon
On or off
On or off
80–120
20
5
0
30
20
25
30
40
5
50
0