Table of Contents
Advertisement
The gearbox temperature
•
When the temperature is below +40°C (+104°F), the text "lo" is displayed.
•
When the temperature is between +40-+119°C (+104-+246°F), the actual
temperature is displayed.
•
When the temperature is above +119°C (+246°F), the text "high" is
displayed.
NOTE: If the gearbox temperature is continuously above +90°C (+194°F), clean
the radiator and check the oil level.
3.10.2.11 Travel distance and surface area view
The view shows the travel distance in metres, kilometres, yards or miles and the
surface area in hectares or acres. You can also reset the distance and area
readings.
The travel distance and surface area
display.
GUID-E6695633-305E-4F91-A103-FB745DC17350
1. Travel distance
2. Surface area
The travel distance is displayed as follows:
•
For distances <1 km (mile), the m (yard) symbol is displayed and the
distance is displayed with the accuracy of 1 m (yard).
•
For distances >1 km (mile), but ≤100 km (miles), the display symbol changes
to km (miles) and the distance is displayed with the accuracy of 2 decimals.
•
Distances >100 km (miles) are displayed with the accuracy of 1 decimal.
•
The maximum distance displayed is 999.9 km (miles).
The surface area view shows the amount of area worked. The area reading
increases only when the implement is used to work the soil (the linkage is not in
the transport position). The worked area is stored in the memory when the power
is turned off.
You can change the unit of distance (km, miles) and area (ha, acre) by changing
the unit of length.
is displayed as follows:
79.84
km
2.50
1
ha
1.2 17:52
2
- 149 -
appear on the top and middle row of the
3. Operation
Advertisement
Table of Contents
