Activating And Deactivating Automatic Shifting Between Speed Ranges C And D - Valtra T144 Operator's Manual

3. Operation
3. Press
limit value for shifting up.
GUID-09A4F7B3-D255-452C-9C20-7529AB3B0922
1. Menu for setting the engine speed limit for shifting up
NOTE: The engine speed limit can be changed in the 1000-2400 rpm range.
However, the upward changing limit must be at least 100 rpm higher than the
downward changing limit. For example, if the engine speed limit for
downward shifting is set to 1500 rpm, the engine speed limit for upward
shifting can only be set between 1600–2400 rpm.
4. Press the
level.
5. Scroll to AUTO2 LO with the arrow buttons on the control panel for the A-
pillar display.
NOTE: The engine speed limit can be changed in steps of 50 rpm in the
900-2300 rpm range.
With a short press of the ESC button you can return to the menu 2. A long
press of the ESC button returns to the previously active drive display. The
current engine speed limit for shifting down appears on the A-pillar display.
6. Press
limit value for shifting down.
7. Press the
level.
NOTE: The engine speed limits remain in the memory after the power has
been turned off.
3.8.11.8 Activating and deactivating automatic shifting between speed ranges
C and D
You can activate or deactivate the shifting automatics to change the speed range
automatically between the speed ranges C and D through the A pillar display. In
this case the speed range changes automatically according to the driving
situation. The index determines the limit for automatic shifting between speed
ranges C and D. The values are "0" for off and "1" for on.
1. Press
and use the arrow buttons to scroll to the desired engine speed
1
button to save the value and return to the previous menu
and use the arrow buttons to scroll to the desired engine speed
button to save the value and return to the previous menu
to activate the A-pillar display.
- 120 -