Pcb Parameters For The Pcb + Sensor Kit For Circuits With Mixing Valve; Counters / Time Prog / Menus Clock - DeDietrich AWHP 4 MR User Manual

6 Settings
Parameters
HP062
HP063
HP064
AP103
AP104
AP105
Tab.17 List of parameters accessible to the user
Parameters
AP073
AP074
CP010
CP040
CP071
CP072
CP320
CP350
CP360
CP540
CP570
36 MIV-4
Description
Cost of peak time electricity
Can be set from 1 to 250 (x € 0.01/kWh)
Cost of off-peak electricity
Can be set from 1 to 250 (x € 0.01/kWh)
Cost of fossil energy (oil or gas) - price per litre or per m
Can be set from 1 to 250 (x € 0.01/kWh)
Display language
Display contrast
Temperature display unit (°C or °F)
6.1.4 PCB parameters for the PCB + sensor kit for circuits with
mixing valve
Certain parameters are displayed:
Description
SUMMER / WINTER set point switch:
Can be set from 15 to 30°C
Set to 30.5°C = function deactivated
SUMMER override:
0 = OFF
1 = ON
Heating water flow temperature set point for the area heated
Can be set from 7 to 100°C.
Post-operation time of the generator pump
Can be set from 0 to 20 minutes
Room temperature set point in reduced mode
Can be set from 5 to 30°C.
Room temperature set point in comfort mode
Can be set from 5 to 30°C.
Circuit operating mode
0 = Timer program
1 = Manual
2 = Frost protection
Not available on this version
Not available on this version
Swimming pool water temperature set point
Can be set from 0 to 39°C
Set to 0: frost protection operation
Not available on this version

6.1.5 COUNTERS / TIME PROG / menus CLOCK

This menu contains the following sub-menus:
according to certain system configurations,
according to the options, circuits or sensors actually connected.
COUNTERS
TIME PROG : timer program
CLOCK
Factory setting
13
9
90
3
°C
Factory setting
22°C
0
40°C
4 minutes
16°C
20°C
0
20°C
7623755 - v02 - 03072015
Customer setting
Customer setting