Operation; Use Of The Control Panel; Browsing In The Menus - DeDietrich AWHP 4 MR User Manual

5 Operation

5 Operation
5.1

Use of the control panel

Fig.17 Accessing the menus
MW-5000009-3
Fig.18 Choosing the menu
Fig.19 Choosing the menu
28 MIV-4

5.1.1 Browsing in the menus

Note
The first time a key is pressed, the backlit screen is switched on.
The name of the PCB is displayed: check that it is actually the
PCB on which the setting must be made.
1. To access the menu level, press the two keys on the right simultane­
ously.
2. To go back to the main display, press the
3.
Note
The
MW-5000018-3
Note
The
To select the desired menu, press the
the desired menu flashes.
MW-3000248-2
key is used to move to the right.
key is used to move to the left.
Information menu
User menu
Installer menu
Forcing Manual mode
Failure menu
Hour run meters sub-menu
Timer Program sub-menu
Clock sub-menu
The icon is displayed only if an optional PCB has
been installed
key.

or key until the icon for
7623755 - v02 - 03072015