The Upnp Screen; Technical Reference - ZyXEL Communications LTE7410 User Manual

Table 9 Static DHCP: Add New Static Lease (continued)
LABEL
OK
Back

5.5 The UPnP Screen

Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a
network, obtain an IP address, convey its capabilities and learn about other devices on the network.
In turn, a device can leave a network smoothly and automatically when it is no longer in use.
See page 41
Use the following screen to configure the UPnP settings on your LTE Device. Click Network Setting
> Home Networking > Static DHCP > UPnP to display the screen shown next.
Figure 19 Network Setting > Home Networking > UPnP
The following table describes the labels in this screen.
Table 10 Network Settings > Home Networking > UPnP
LABEL
UPnP
Apply
Cancel

5.6 Technical Reference

This section provides some technical background information about the topics covered in this
chapter.
DHCP Setup
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to
obtain TCP/IP configuration at start-up from a server. You can configure the LTE Device as a DHCP
server or disable it. When configured as a server, the LTE Device provides the TCP/IP configuration
for the clients. If you turn DHCP service off, you must have another DHCP server on your LAN, or
else the computer must be manually configured.
Chapter 5 Home Networking
DESCRIPTION
Click Apply to save your changes.
Click Back to exit this screen without saving.
for more information on UPnP.
DESCRIPTION
Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to
open the web configurator's login screen without entering the LTE Device's IP address
(although you must still enter the password to access the web configurator).
Click Apply to save your changes.
Click this to restore your previously saved settings.
LTE7410 User's Guide
39