Ssh Example - ZyXEL Communications LTE7410 User Manual

Figure 96 Maintenance > Remote MGMT > SSH
The following table describes the labels in this screen.
Table 63 Maintenance > Remote MGMT > SSH
LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Cancel

23.5.1 SSH Example

This section shows an example using a graphical interface SSH client program to remotely access
the ZyXEL device. The configuration and connection steps are similar for most SSH client programs.
Refer to your SSH client program user's guide.
Enter the IP address and port number. Select SSH.
1
Chapter 23 Remote Management
DESCRIPTION
This displays the service port number for accessing the LTE Device. If the number is
grayed out, it is not editable.
Select the interfaces through which a computer may access the LTE Device using this
service.
Note: It is recommended if you are allowing WAN access even temporarily to change the
default password (in Maintenance > User Account). To allow access from the
WAN, you will need to configure a WAN to Router firewall rule.
A secured client is a "trusted" computer that is allowed to communicate with the LTE
Device using this service.
Select All to allow any computer to access the LTE Device using this service.
Choose Range to just allow the computers with an IP address in the range that you
specify to access the LTE Device using this service.
Click this to save your changes.
Click this to restore your previously saved settings.
LTE7410 User's Guide
137