The Upnp Screen - ZyXEL Communications VMG8924-B10D User Manual

The following table describes the labels in this screen.
Table 31 Static DHCP: Static DHCP Configuration/Edit
LABEL
Active
Group Name
IP Type
Select Device Info
MAC Address
IP Address
OK
Cancel

8.4 The UPnP Screen

Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for simple
peer-to-peer network connectivity between devices. A UPnP device can dynamically join a network,
obtain an IP address, convey its capabilities and learn about other devices on the network. In turn, a
device can leave a network smoothly and automatically when it is no longer in use.
See page 121
Use the following screen to configure the UPnP settings on your VMG. Click Network Setting > Home
Networking > UPnP to display the screen shown next.
Figure 50 Network Setting > Home Networking > UPnP
Chapter 8 Home Networking
DESCRIPTION
Select Enable to activate the connection between the client and the VMG. Otherwise, select
Disable to deactivate.
Select the interface group name for which you want to configure static DHCP settings. See
Chapter 15 on page 185
This field displays IPv4 for the type of the DHCP IP address. At the time of writing, it is not
allowed to select other type.
Select a device or computer from the drop-down list or select Manual Input to manually enter
a device's MAC address and IP address in the following fields.
If you select Manual Input, enter the MAC address of a computer on your LAN.
If you select Manual Input, enter the IP address that you want to assign to the computer on
your LAN with the MAC address that you will also specify.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
for more information on UPnP.
VMG8924-B10D/B30D User's Guide
for how to create a new interface group.
127