Table 47 Static DHCP: Static DHCP Configuration/Edit (continued)
LABEL
Cancel
OK
8.4 The UPnP Screen
Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for simple
peer-to-peer network connectivity between devices. A UPnP device can dynamically join a network,
obtain an IP address, convey its capabilities, and learn about other devices on the network. A device
can then leave a network smoothly and automatically when it is no longer in use.
See
page 152
Use the following screen to configure the UPnP settings on your Zyxel Device. Click Network Setting >
Home Networking > UPnP to display the screen shown next.
Note: To use UPnP NAT-T, enable UPnP.
Figure 78 Network Setting > Home Networking > UPnP
The following table describes the labels in this screen.
Table 48 Network Setting > Home Networking > UPnP
LABEL
UPnP State
UPnP
UPnP NAT-T State
Chapter 8 Home Networking
DESCRIPTION
Click Cancel to exit this screen without saving.
Click OK to save your changes.
for more information on UPnP.
DESCRIPTION
Click this switch to enable or disable UPnP. When the switch turns blue
enabled. Otherwise, it's not.
Be aware that anyone could use a UPnP application to open the web configurator's login
screen without entering the Zyxel Device's IP address (although you must still enter the password
to access the web configurator).
VMG/XMG Series User's Guide
159
, the function is