User Operation - Mitsubishi Electric AG-150A Instruction Book

4. User operation

Used the following two screens when user operation is performed.
• Floor layout/block display screens ....................Displays the operation status (ON/OFF) and error status of the air conditioning units
• Air conditioning unit operation setting screen....Collective or individual group operation of indoor units are performed on this screen
<Accessing the Floor layout, Block display, and Air conditioning unit operation setting screens>
Block button
Floor layout (simplified icons)
Press [Block].
Floor button
Block display
Refer to Section 4-1 "Operation condition
monitor".
This is the screen that is normally used.
(ON/OFF, operation mode, air flow direction, fan speed, temperature setting, timer
enable/disable, prohibition/permission of operation from local remote controller,
filter reset, room temperature display).
Zoom-in button
[Zoom-out button]
[Zoom-in button]
Press [Block].
Press [Floor].
Select a group and
press [Operate].
Press [OK] or
[Cancel].
(Applicable only
when the operation
screen is accessed
from the Block
display screen)
Operation
button
Refer to Section 4-1 "Operation condition
monitor".
Press
Press
Press [OK] or
[Cancel].
(Applicable only
when the operation
screen is accessed
from the Block
display screen)
Refer to Section 4-2 "Prohibiting the operation of
air conditioning units from the local remote
controllers".
– 12 –
Zoom-out button
Floor layout (icons)
Select a group and
press [Operate].
OK button
Air conditioning unit
operation screen
Operation button
Cancel button