User Operation - Mitsubishi Electric G-50A Instruction Book

4. User operation

Used the following two screens when user operation is performed.
Operation monitor screen ........ This screen displays ON/OFF and malfunction condition of unit.
Operation setting screen .......... The unit operations can be performed by individual group or collective op-
• The collective operation can be performed on any screen (except for the menu screen) in the user operation mode.
<Shifting to the operation monitor screen and operation setting screen>
Press the switch and
1
select "1 OPERATION MONITOR"
Operation monitor screen
The unit operation can be verified in
a single glance.
Refer to section "4-1 Operation
condition monitor".
<Returning to the user operation menu screen>
BACK
Press the (back screen) switch.
SCREEN
G-50A normally displays this screen.
eration. These operation include the ON/OFF, operation mode, fan speed,
temperature setting, air direction, ventilation setting, timer operation ON/OFF,
local remote controller prohibition and filter sign reset are performed by group
or collectively. In addition, this screen can also displays the room tempera-
ture of each group.
BACK
Press the switch.
SCREEN
ENTER
Press the switch.
Press the or switch to set
"MON. (MONITOR)" on the blinking dis-
ENTER
play and press the switch.
Press the
to set "COL.(COLLECTIVE)" or
"GROUP" on the blinking display
and press the
– 10 –
User operation menu screen
Press the switch and
2
select "2 OPERATION SETTING"
(Individual group
or switch operation setting
screen)
ENTER
switch.
(Collective
Each unit operation
operation
setting is performed.
setting screen)
Refer to section "4-2 Operation setting".