Kipor Sinemaster IG3000 Operation Manual page 8

2.2 Control panel
SMART throttle switch
DC receptacle
Output indicator light
(Green)
Overload indicator light (Red)
Oil alarming indicator (Red)
Start switch
Fig 2. Control panel
Parallel receptacle
The parallel cabinet can be connected with the parallel socket when the
generator set needs a increasing of parallel output power.
2.3 SMART throttle
Engine speed is kept at idle automatically when the electrical
discon nected and it returnes to the proper speed by the electrical load when
electrical appli ance is connected. This position is recommended to minimize the
fuel consumption while in operation
When high electrical load appliances are connected simultaneously, turn
the smart throttle switch to the OFF position to reduce voltage changes.
Smart throttle system does not operate sufficiently if the electrical
appliance equires the much electric power.
Turn the smart throttle switch to the OFF position when in DC operating.
OFF:
If SMART throttle system shut off , the engine is in high speed state.
Parallel receptacle
AC receptacle
Grounding terminal
Fuel valve lever
Chock knob
appliance is
NOTE
NOTE
-4-
12. WHEEL KIT
1. Axle
2. 2.5 inches swivel wheel
3. Bolt M8X16
4. Wheel
5. Bolt M6X16
-25-